V8901-KIT-ESD
3/8" (9.53mm), 1/2" (12.7mm) diameter. Three straight probes mounted with cup sizes 1/4" (6.35mm), 3/8" (9.53mm), 1/2" (12.7mm) diameter. Includes Vacuum Pen holder with eight locations for holding your probes and cups.
Standard PEN-VAC?, Conductive Silicone Cups, VBM-3 Vacuum Pen Holder
The PEN-VAC is totally self-contained. There are no batteries or hoses to get in the way. Operation is as follows:
1. Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place. Put the probe snuggly on the tip of the vacuum pen. Make sure that there is no dust on the rubber vacuum tip. NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.
2. Depress AND hold the button on the side of the tool.
3. Touch the vacuum tip squarely to the part and release the button. The part is now grasped.
4. Move the part to where you want it and depress the button again. The part is now released.
pen-vac五彎探頭安裝杯大小的1 / 8“（3.18mm），3 / 16“（4.76mm），1 / 4“（6.35mm），
3/8“（9.53mm），1/2”（12.7mm）直徑。三直探頭安裝杯大小的1 / 4“（6.35mm），3 / 8“（9.53mm），1 / 2“（12.7mm）直徑。包括八個放置你的探針和杯子的真空筆筒。
標準pen-vac?，導電硅杯，vbm-3真空筆筒
pen-vac是完全獨立的。沒有電池或軟管堵塞。操作如下：
1。在探針上選擇一個橡膠真空杯，比你要選擇和放置的部分稍小一些。把探針snuggly在真空鋼筆尖。確保橡膠真空尖端沒有灰塵。注：我們的較大的橡膠真空杯可以直接放置在真空筆尖不使用探針。
2。按下并按住工具一側(cè)的按鈕。
三.將真空尖端直接對準零件并松開按鈕。這部分現(xiàn)在掌握了。
4。把零件移到你想要的地方，再按下按鈕。該部分現(xiàn)已發(fā)布。