人人舔人人,特黄免费,色婷婷一区二区三区四区成人

您好，歡迎訪問蘇州賽浦斯電子有限公司官網

簡體中文 | English | 代理合作 | 關于我們 | 聯系我們

咨詢熱線

0512-66324802

產品中心

首頁 >> 真空吸筆

TV-1000-220

電動吸筆

市場價:0.00

價格:0.00
tv-1000

電動吸筆

市場價:0.00

價格:0.00
dtv-2000-220

電動吸筆

市場價:0.00

價格:0.00
dtv2000

電動吸筆

市場價:0.00

價格:0.00
真空吸筆TV-100

電動吸筆

市場價:0.00

價格:0.00
V8100A-FS-220-DLX-A真空吸筆

電動吸筆

市場價:0.00

價格:0.00
V8100A-FS-220-DLX-B真空吸筆

電動吸筆

市場價:0.00

價格:0.00
V8100A-FS-220-DLX-T真空吸筆

電動吸筆

市場價:0.00

價格:0.00
V8100A-FS-220-DLX-D真空吸筆

電動吸筆

市場價:0.00

價格:0.00
VFS-1真空吸筆

電動吸筆

市場價:0.00

價格:0.00
VHS-1真空吸筆

電動吸筆

市場價:0.00

價格:0.00
V8100A-220-HS真空吸筆

電動吸筆

市場價:0.00

價格:0.00
V8100A-220真空吸筆

電動吸筆

市場價:0.00

價格:0.00
真空吸筆V3200-CLN

電動吸筆

市場價:0.00

價格:0.00
HV-X

手動吸筆

市場價:0.00

價格:0.00

HANDI-VAC ONLY, No Attachments, with box. You buy the cups or cups and probes that you need seperatlyOur HANDI-VAC kits are a low cost pick-and-place tool that can go in everybody’s tool box. These tools are simple to operate: 1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the HANDI-VAC tool.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the HANDI-VAC tip without using a probe. 2.    Gently squeeze the HANDI-VAC bulb, place the soft suction cup squarely on the pick-and place part, then relax your squeeze. The part is now firmly gripped. 3.    Move the part to where you need it and a second squeeze of the bulb releases the part.
V8902-LMS-B

手動吸筆

市場價:0.00

價格:0.00

PEN-VAC?, ESD-SAFE, 5 3/4" (146mm) black anodized aluminum body kit with three bent probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8" (3.18mm), 1/4" (6.35mm), 3/8" (9.53mm) diameter. Three straight probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8" (3.18mm), 1/4" (6.35mm), 3/8" (9.53mm) diameter. These vacuum pens are ideal for SMT assembly or for handling any parts that have a non-porous surface. No batteries or hoses to get in your way. Features a rear storage compartment for cups or probe.  The vacuum cups are Static Dissipative and non-marking.  The PEN-VAC? is totally self-contained.PEN-VAC，ESD-安全型，5 3/4（146mm）黑色陽極氧化鋁主體套件，帶有三個彎曲探頭，安裝有無標記的靜電耗散丁腈橡膠-N杯，直徑1/8”（3.18mm），1/4”（6.35mm），3/8（9.53mm）。三個直探頭，安裝有無標記的靜電耗散丁腈橡膠杯，尺寸為1/8”（3.18mm）、1/4”（6.35mm）、3/8（9.53mm）。這些真空筆是SMT組裝或處理任何具有非多孔表面的零件的理想選擇。沒有電池或軟管擋住你的路后儲物箱可存放杯子或樣品。真空吸盤為不防靜電耗散型，無標記。真空筆是完全獨立的。不防靜電》
V8901-A-ESD

手動吸筆

市場價:0.00

價格:0.00

PEN-VAC, ESD safe, 5 3/4" silver body, kit with (3) bent probes with 1/8", 1/4" and 3/8" cups and (1) straight probe with 1/4" diameter conductive silicone cups.The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.2.    Depress AND hold the button on the side of the tool.3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.4.    Move the part to where you want it and depress the button again.  The part is now released.NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.PEN-VAC，防靜電保護，5 3/4“銀色機身，配有（3）個彎曲探頭和1/8”、1/4”和3/8“皮碗，以及（1）個直探頭和1/4”直徑導電硅膠皮碗。PEN-VAC是完全獨立的。沒有電池或軟管阻擋。操作如下：1。選擇一個探針上帶有橡膠真空杯的尖端，該探針略小于要拾取和放置的零件。把探針緊貼在真空筆的頂端。確保橡膠真空吸嘴上沒有灰塵。注意：我們較大的橡膠真空杯可以直接放在真空筆頭上，而不用探針。2。按住工具側面的按鈕。三。將真空吸嘴垂直接觸零件并松開按鈕。現在抓住了這一部分。4。將部件移動到所需位置，然后再次按下按鈕。零件現在釋放。注意：此工具僅適用于橡膠真空吸嘴。密封需要橡膠。
V8910-9BK-ESD

手動吸筆

市場價:0.00

價格:0.00

PEN-VAC PRO SERIES black body, (2) bent, & (2) straight probes, 1/8,1/4,3/8,1/2" conductive silicone cups, packaged for pegboard display.The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.2.    Depress AND hold the button on the side of the tool.3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.4.    Move the part to where you want it and depress the button again.  The part is now released.NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.Pen-Vac Pro系列黑色機身，（2）彎曲；（2）直探頭，1/8、1/4、3/8、1/2“導電硅膠杯，包裝用于釘板顯示器。PEN-VAC是完全獨立的。沒有電池或軟管阻擋。操作如下：1。選擇一個探針上帶有橡膠真空杯的尖端，該探針略小于要拾取和放置的零件。把探針緊貼在真空筆的頂端。確保橡膠真空吸嘴上沒有灰塵。注意：我們較大的橡膠真空杯可以直接放在真空筆頭上，而不用探針。2。按住工具側面的按鈕。三。將真空吸嘴垂直接觸零件并松開按鈕。現在抓住了這一部分。4。將部件移動到所需位置，然后再次按下按鈕。零件現在釋放。注意：此工具僅適用于橡膠真空吸嘴。密封需要橡膠。
V8902-LMS-ESD防靜電吸筆

手動吸筆

市場價:0.00

價格:0.00

PEN -VAC, ESD -safe, 53 /4 (146 mm) corpo di allumina anodica nera, con tre sonde di curvatura, installate con vetro fuoricarico elettrostatico dissipativo nitrile butadiene in gomma -N, diametro 1 /8 (3.18 mm), 1 /4 (6.35 mm), 3 /8 (9.53 mm).Tre sonde rettilinee sono installate con coppe NBR dissipative elettrostatiche a vuoto con dimensioni di 1 /8 (3.18mm), 1 /4 (6.35mm) e 3 /8 (9.53mm).Questi aspiratori sono ideali per il montaggio SMT o il trattamento di qualsiasi parte con una superficie non porosa.Non ci sono batterie o tubi che bloccano il vostro modo di immagazzinare tazze o campioni nel bidone posteriore.Il getto sotto vuoto è un tipo di dissipazione elettrostatica.La penna a vuoto è completamente indipendente.AntistaticoPEN-VAC，ESD-安全型，5 3/4（146mm）黑色陽極氧化鋁主體套件，帶有三個彎曲探頭，安裝有無標記的靜電耗散丁腈橡膠-N杯，直徑1/8”（3.18mm），1/4”（6.35mm），3/8（9.53mm）。三個直探頭，安裝有無標記的靜電耗散丁腈橡膠杯，尺寸為1/8”（3.18mm）、1/4”（6.35mm）、3/8（9.53mm）。這些真空筆是SMT組裝或處理任何具有非多孔表面的零件的理想選擇。沒有電池或軟管擋住你的路后儲物箱可存放杯子或樣品。真空吸盤為靜電耗散型。真空筆是完全獨立的。防靜電》
V8910-BK-LMS-ESD

手動吸筆

市場價:0.00

價格:0.00

PEN-VAC PRO SERIES black body, probes (1) bent (1) straight each with 1/8" ((3.18mm), 1/4" (6.35mm) and 3/8" (9.53mm) diametermeter conductive silicone vacuum cups.The PEN-VAC is totally self-contained.  There are no batteries or hoses to get in the way.  Operation is as follows:1.    Select a tip with a rubber vacuum cup on a probe that is slightly smaller than the part you want to pick and place.  Put the probe snuggly on the tip of the vacuum pen.  Make sure that there is no dust on the rubber vacuum tip.  NOTE: Our larger rubber vacuum cups can be placed directly on the vacuum pen tip without using a probe.2.    Depress AND hold the button on the side of the tool.3.    Touch the vacuum tip squarely to the part and release the button.  The part is now grasped.4.    Move the part to where you want it and depress the button again.  The part is now released.NOTE: This tool works only with the rubber vacuum tips.  The rubber is required for an air-tight seal.Pen-Vac Pro系列黑色機身，探頭（1）彎曲（1）筆直，每個帶有1/8”（（3.18mm）、1/4”（6.35mm）和3/8”（9.53mm）直徑的導電硅真空杯。PEN-VAC是完全獨立的。沒有電池或軟管阻擋。操作如下：1。選擇一個探針上帶有橡膠真空杯的尖端，該探針略小于要拾取和放置的零件。把探針緊貼在真空筆的頂端。確保橡膠真空吸嘴上沒有灰塵。注意：我們較大的橡膠真空杯可以直接放在真空筆頭上，而不用探針。2。按住工具側面的按鈕。三。將真空吸嘴垂直接觸零件并松開按鈕。現在抓住了這一部分。4。將部件移動到所需位置，然后再次按下按鈕。零件現在釋放。注意：此工具僅適用于橡膠真空吸嘴。密封需要橡膠。
HV2-1.00-AW-PUR

手動吸筆

市場價:0.00

價格:0.00

HANDI-VAC-2? with Anti-Wobble Tip and PureACleanTM blue, non-marking 1” (25.4mm) Diameter vacuum cup. HANDI-VAC?-2 is designed to pick up larger parts and to minimize wobble. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeeze releases the part.Applications for this tool include pick-and-place of any size of LGA processor.  In the factory it is ideal for picking processors from trays and placing them into motherboard sockets.  For field service operations it is ideal for picking the processor from the shipping tray and placing it into a motherboard socket.  The anti-wobble cone provides stability when placing large processors into precision sockets.  This tool can be used for handling a variety of large substrates.  HADIN-VAC-2?帶防搖晃尖端和pureacleantm藍色，無標記1”（25.4毫米）直徑的真空杯。Handi-Vac?-2的設計目的是收集更大的零件，并盡量減少搖擺。只需擠壓真空球，將軟吸盤放在要處理的部件上，然后放松擠壓，部件牢牢抓住。第二次擠壓釋放零件。該工具的應用程序包括任意尺寸的LGA處理器的拾取和放置。在工廠中，它是從托盤中挑選處理器并將其放入主板插座的理想選擇。對于現場服務操作，它非常適合從裝運托盤中選擇處理器并將其放入主板插座中。在將大型處理器放入精密插座時，抗搖擺錐體提供穩定性。該工具可用于處理各種大型基板。
HV2-KIT-4-ESD

手動吸筆

市場價:0.00

價格:0.00

This improved HANDI-VAC?-2 has a new and improved tip designed for better lifting capacity utilizing larger vacuum cups.  This new tip can be purchased with one cup of your choice for enhanced functionality and improved accuracy when picking and placing parts.  The entire tool is constructed with ESD-safe materials.
HV-KIT-II-PUR

手動吸筆

市場價:0.00

價格:0.00

HANDI-VAC? KIT, with (3) bent probes, (2) straight probes and (5) PureACleanTM blue, non-marking vacuum cups; 1/8", 3/16", 1/4", 3/8" and 1/2". Our vacuum-bulb type tools are the lowest cost pick-and-place tools available. These tools operate very similar to a tweezer. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeeze releases the par
V8920E-A-ESD

手動吸筆

市場價:0.00

價格:0.00

PEN-VAC? Junior, ESD-SAFE, 5" (127mm) anodized aluminum body kit with three bent probes mounted with Non-marking Static Dissipative Buna-N Cup sizes 1/8" (3.18mm), 1/4" (6.35mm), 3/8" (9.53mm) diameter, one straight probe mounted with Non-marking Static Dissipative Buna-N Cup size 1/4" (6.35mm) diameter.  These vacuum pens are ideal for SMT assembly or for handling any parts that have a non-porous surface. No batteries or hoses to get in your way. The PEN-VAC? is totally self-contained.Pen-Vac?Junior，ESD-SAFE，5”（127mm）陽極氧化鋁主體套件，帶有三個彎曲探頭，安裝有1/8”（3.18mm）、1/4”（6.35mm）、3/8”（9.53mm）直徑的無標記靜電Buna-N杯，一個直探頭安裝有1/4”（6.35mm）直徑的無標記靜電Buna-N杯。直徑。這些真空筆是SMT組裝或處理任何具有非多孔表面的零件的理想選擇。沒有電池或軟管擋住你的路。PEN-VAC?完全獨立。
真空吸筆HV-KIT-B

手動吸筆

市場價:0.00

價格:0.00
V3024賽浦斯真空吸筆

手動吸筆

市場價:0.00

價格:0.00
v3025真空吸筆

手動吸筆

市場價:0.00

價格:0.00
VVP-200-1/16

手動吸筆

市場價:0.00

價格:0.00

1/16" (1.59mm) ID hose barb. Lightweight aluminum 1/2" diameter handle for vacuum handling systems. This new vacuum pen allows you to immediately pick up a part by touching the vacuum tip to the surface of the part. A slight press of the button releases the part. The unique design eliminates internal O-rings for years of maintenance free operation.5 1/4" (133.35mm) long, 1/2" (12.70mm) diameter.This product requires a continuous vacuum source.
VVP-200-1/8氣動真空吸筆

手動吸筆

市場價:0.00

價格:0.00
真空吸筆VC-3-ESD

手動吸筆

市場價:0.00

價格:0.00
真空吸筆VC-3-075-AW-B

手動吸筆

市場價:0.00

價格:0.00
真空吸筆HV-30S/HV-25S/HV-20S

手動吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPW6000AR-MW6-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPW6000AR-MW8-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7000AR-MW6-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7000AR-MW8-220

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7300AR-MW4-220

電動晶圓吸筆

市場價:0.00

價格:0.00
VPWE7300AR-MW6-220晶圓吸筆

電動晶圓吸筆

市場價:0.00

價格:0.00
晶圓吸筆VPWE7300AR-VWT5R-AR

電動晶圓吸筆

市場價:0.00

價格:0.00
12寸吸筆VWWB-2A-MW12-1/8

氣動晶圓吸筆

市場價:0.00

價格:0.00
8寸吸筆VWWB-2A-MW8-1/8

氣動晶圓吸筆

市場價:0.00

價格:0.00
6寸吸筆VWWB-MW6-1/8

氣動晶圓吸筆

市場價:0.00

價格:0.00
4寸吸筆VWWB-MW4-1/8

氣動晶圓吸筆

市場價:0.00

價格:0.00
2-4寸高溫VWWB-10020-1/8

氣動晶圓吸筆

市場價:0.00

價格:0.00

< 12 3 4 5 >

友情鏈接： 阿里網站淘寶店鋪導熱散熱論壇中國LED網模切之家??